Harry Potter Trunk

10:36 AM NicoleMichelle 7 Comments


Information
The decorative storage box was found at Michaels Craft Stores. I believe Joann Fabric & Craft Stores carries them as well but I found Michaels Craft Stores had more size options. The other supplies like the studs, buckles, and fabric was found at Joann Fabric & Craft Stores. I used a dark-brown/black leather fabric for the straps of the trunk and a medium brown colored leather fabric for the actual trunk. The matte brown spray paint and Mod Podge I got at Walmart.
(1) For my trunk, I first spray painted the entire box, besides the outside part of the lid since I was going to be adding the fabric to it. (2) Then I painted a layer of Mod Podge to all the areas I spray-painted, because I found that the paint can scratch off if you skip this step. (3) I only attached the leather material to the lid and back part of the box. I used hot glue because it works best with the leather fabric. (4) I put a dot of hot glue before I gently hammered a stud in to make sure it stayed secure. I added studs to all the corners. (5) Hot glue is used again to attach the leather straps to the leather on the trunk back and lid. I also added two strap pieces to the front of the trunk and had the straps from the lid hanging over. (6) I attached the buckles to the straps hanging from the lid and attached Velcro to the back of the straps to secure the lid close. (7) I used the matte Mod Podge to attach all the printouts to the top and underside of the lid as well as the book pages to the inside of the box. 
I did feel slightly remorseful ripping the chapter pages from Harry Potter & the Sorcerer’s Stone, but then I got over it cause the inside turned out really neat.



Information
Just like the box for the trunk, I found the hollow storage book box at Michaels Craft Stores. The other supplies such as the fur & brown eyes can be found at Joann Fabric & Craft Stores. 

E6000 glue is best for gluing the fur fabric to the book because it is more flexible for opening and closing the cover than the hot glue is. The hot glue I used to glue the title and eyes to the fur. 

First I covered the whole book with fur (E6000 for the spine, hot glue for the rest) then I folded some felt and hot glued it in the middle of the book to create the small hump then covered the felt with another piece of fur for the eyes to sit against. Make sure the piece of fur you cover the hump with is the same direction as the fur of the full book so it blends in.

**UPDATE**
I recently created another Monster Book of Monsters, and this time I decided I wanted to add teeth and a tongue. 
The only materials I used were Red & White Clay in addition to hot glue to secure them to the book.

I also have an updated version with different eyes. I got from Joann's
"Shank Back Animal Eyes 12mm 6/Pkg-Brown"
I cut off the black part and just hot glued the eyes to the fur.






Resources
Other printouts you may want to add can be found doing a simple Google image search.
It is best if printed on thicker cardstock paper than regular printing paper.
**Besides the "Monster Book of Monsters" image, I did not create the other images below.**







ETSY

After many people asking me to, I finally opened up my own Etsy shop. 
**Charmingmischief**

Go check out my first listing!










7 comments :

  1. What did you use to prop up the eyes on your monster book?? I love this idea for a gift for a friend of mine.

    ReplyDelete
    Replies
    1. After I covered the whole book in the fur,
      I saved an extra piece of the fur to add to the front of the book. I rolled a piece of felt and put that under the extra fur piece to create the bump. This fur piece blends well when the bristles are going the same way. Hot glue works best.
      I also have an updated version that just has different eyes. They are better than the ones see here, but you can still get them at Joann's. I will find a picture of them and post it.

      Delete
  2. What did you use to do the writing of the book of monsters did you back it and cut it out or is it a transfer

    ReplyDelete
    Replies
    1. Hi, I printed and cut it out. I just used hot glue to attach it to the fur on the cover.

      Delete
  3. The shoes, did you print something and glued it to the shoes? Do you have any other pictures of them? My daughter would love a pair like that.

    ReplyDelete
    Replies
    1. Hi! Pictures of my shoes are on my instagram @charmingmischief
      I painted these shoes myself, nothing is glues to them.

      Delete
  4. Thanks for tutorial !
    https://espritpop.blogspot.com/2018/08/fan-film-harry-potter-voldemort-les.html

    ReplyDelete